Home  >  Wavelengths 900nm-1190nm  >  Fibercom   >  RLS/FB-S1060-50SOT148


1060nm, 50 mW, Fabry-Perot Laser Diode

  • 1060nm Fabry-Perot Laser Diode FiberCom

sku / item#: RLS/FB-S1060-50SOT148
ships: 2 to 3 weeks

Key Features
  • Peak Wavelength 1060 nm (±10nm)
  • CW Optical Output Power 50 mW
  • Operation Current <100 mA
  • Offered by: FiberCom, a Laser Lab Source Marketplace Seller
  • Sold & Supported in North America by: LaserDiodeSource.com, part of the
    Laser Lab Source Marketplace Group

Price and Delivery Quote

Buy Now / Add to Cart

Technical Questions for this Product


Customers Also Considered:

Why do Scientists & Engineers Choose Laser Lab Source?

PRICE $305.00
Key Specifications
  • Peak Wavelength: 1060(±10) nm
  • CW Optical Output Power: 50 mW
  • Operation Current: <100 mA
  • Operation Voltage: 1.3±0.3 V
  • Threshold Current: <35 mA
  • Beam Divergence (FWHM): 10±2 degee
  • Beam Divergence (FWHM): 40±5 degree
  • Spectrum Half-Width (FWHM): <5 nm
  • Emitting Area: 5x1 µmxµm
  • Operation Temperature: 25 degree
  • Monitor Current: 1-1000 µA
  • PD Reverse Voltage: <5 A

Product Overview:

1060nm, 50 mW Fabry-Perot Laser Diode Overview

With a center wavelength at 1060nm and output power of 50 mW, this TO-can packaged laser diode includes an internal photodiode.

Important Notes on Operating Laser Diodes:

Electrical Operation: Operating a laser diode above the maximum ratings shown on the data sheet even for very short periods of time can damage the laser diode or reduce its lifetime. They should be electrically biased with a ""laser diode driver"" class current supply with low electrical noise and protection against voltage and current surges. Laser diodes are very sensitive to electrostatic discharge (ESD). Proper ESD precautions must be taken.

Mounting and Temperature Control: In order to maintain the lifetime of a laser diode, proper heat management is essential. Due to the design of the laser diode, heat is typically dissipated only through the base plate of the diode‘s package. A proper heat conducting interconnection between the diodes base plate and the heat sink must be maintained. Some devices require the use of a thermo-electric temperature controller (TEC controller) to remove the heat from the laser and stabilize the temperature.

Why do Scientists & Engineers Choose Laser Lab Source?

  • Get DIRECT, Fast Tech-Support from the Product Engineer, No Sales Person in the Middle

  • Get the Lowest Price, Factory Direct, No Mark-Up's, Suppliers Post their Own Price

  • Get a 30 Day Evaluation Period with No Risk Return on Most Products, Check Availability