1064nm DFB Laser in Pre-Configured CW Mode Control and Mount Module:
- 200mW Output Power
- User Replaceable Laser Diode

Product Overview:

Pre-Configured 1064 nm DFB Laser and CW Control Module:

These CW 1064 nm DFB laser source & control modules offer the user a pre-configured, calibrated solution for test and sensing applications. The integrated 1064 nm laser diode source module is a II-VI Laser Enterprise fiber coupled single frequency DFB. A distributed feedback grating located in the laser cavity provides the wavelength stabilization. Both the chip in the butterfly package and the package itself were designed and optimized to provide excellent long term reliability. The coupling of the laser light into the fiber is based on proprietary techniques and manufacturing processes that provide high peak output power. The power is very stable over time and over temperature.

• SIMPLE TO OPERATE:

  System ships with 1064nm laser diode installed and tested in pulse control electronics and mounting module.
  

• FLEXIBLE:

  User can remove and replace the laser diode in the future as needed.
  

• INSTALLATION SUPPORT:

  Get up and running fast with unlimited phone & email tech-support; see contact info in the images section.

High Reliability Telcordia GR-468 Core Compliant Laser Source:

The II-VI source DFB laser is Telcordia GR-468 core qualified, ensuring an outstanding level of long term reliability. The package style is a low profile mini-butterfly which is fiber coupled with PM fiber. The source is rated for operating powers up to 200 mW (CW) in continuous wave mode. The source laser butterfly package incorporates a thermoelectric cooler (TEC), a precision NTC thermistor and a back-facet monitoring photodiode. All of these integrated elements can be controlled and monitored through the control electronics module. These DFB sources have a Polarization Maintaining Fiber (PMF) pigtail. Other key features of these 1064 nm devices include high polarization extinction ration and long MTTF.

Laser Diode Control Electronics and Butterfly Mounting Module:

The control electronics and mounting module for these laser diodes delivers high stability bias current, a precision TEC controller and a pre-configured ZIF mounting socket. These control modules offer multiple mechanical, thermal and electronic protection features. They ensure that your laser diode is protected and operated safely. The on-board TEC controller incorporates a fast feedback PID control loop to provide high temperature set-point stability. A user-set temperature limit keeps the source from thermal damage. Additionally, multiple bias current / voltage protection features are designed to keep the source safe from ESD, power outages and reverse voltage. A user controlled current limit clamps the current at the set limit level.

USB and Control Software:

The user can set and monitor all of the control parameters of the 1064nm source laser using the USB input and the supplied GUI software. These units ship with the USB cable to connect your PC to the connector on the side panel. A simple to use single page menu graphical user interface allows you to control all of the CW parameters as well as set current and temperature limits. Other features of these control modules include a daisy chain output, sync output, alarm monitor and back facet monitor output to monitor the DFB laser's power.