$396.30 sku / item#: RLS/LDI-1270-DFB-10G-COAX-SM1ships: 3 Weeks
- Wavelength 1270 nm
- 15 mW CW / 45 mW Pulsed Optical Output Power
- Single-Mode Fiber, FC/APC Connector
- Integrated Monitor Photodiode
- Other Fibers and Connectors Available
- Offered by LasersCom, a Laser Lab Source Marketplace Seller
Sold & Supported in North America by: LaserDiodeControl.com, part of the Laser Lab Source Marketplace Group
Price and Delivery Quote
You will receive factory-direct price with no mark-ups
Technical Questions for this ProductASK AN ENGINEER
Questions route directly to the product Engineer
Add to Cart or Buy Now
Customers Also Considered:
|ELECTRICAL-OPTICAL CHARACTERISTICS (Typcial @ T = 25 °C)|
|Optical Fiber Specifications|
1270nm, 15 mW CW / 45 mW Pulsed Power Output, 10G Fiber Coupled Laser Diode
LDI-1270-DFB-10G-15/45-COAX-SM1 is an AlGaInAs MQW laser diode with internal photodiode, coupled to an optical fiber and packaged into a hermetic TO-case. This compact coaxial laser is mounted in a double-sided bracket to facilitate mounting and heat-sinking.
• Wavelength: 1270 nm
• Cavity type: DFB
• Data rate up to 10 Gbps
• Optical power: up to 15 mW in CW mode and up to 45 mW in pulse mode in the single-mode fiber G.657.A1
• Package types: coaxial
• Built-in monitor photodiode
Important Notes on Operating Laser Diodes:
Electrical Operation: Operating a laser diode above the maximum ratings shown on the data sheet even for very short periods of time can damage the laser diode or reduce its lifetime. They should be electrically biased with a "laser diode driver" class current supply with low electrical noise and protection against voltage and current surges. Laser diodes are very sensitive to electrostatic discharge (ESD). Proper ESD precautions must be taken.
Mounting and Temperature Control: In order to maintain the lifetime of a laser diode, proper heat management is essential. Due to the design of the laser diode, heat is typically dissipated only through the base plate of the diode‘s package. A proper heat conducting interconnection between the diodes base plate and the heat sink must be maintained. Some devices require the use of a thermo-electric temperature controller (TEC controller) to remove the heat from the laser and stabilize the temperature.
Why do Scientists & Engineers Choose Laser Lab Source?
Get DIRECT, Fast Tech-Support from the Product Engineer, No Sales Person in the Middle
Get the Lowest Price, Factory Direct, No Mark-Up's, Suppliers Post their Own Price
Get a 30 Day Evaluation Period with No Risk Return on Most Products, Check Availability