Home  >  Wavelengths 1310nm-1690nm  >  Eblana Photonics  >  RLS/EP1310

 

1310nm DFB Single Mode / Single Frequency Laser Diode, 14.5 mW

  • 1310nm DFB Laser Diode Butterfly Laser Package
  • 1310nm DFB Laser Diode Narrow Linewidth
  • 1310nm 14.5mW DFB Laser Diode IV Data
  • 1310nm DFB Laser Diode 14.5 Butterfly Pinout
  • 1310nm DFB Laser Diode Low Noise Laser Driver

Request Quote   ships: . | item#: RLS/EP1310

Key Features
  • Designed for Communications and Sensing Applications, Including FTTX, PON & Datacomms
  • DFB Laser / Single Frequency / Single Mode / Proprietary Monolithic Design without External Cavity
  • Tunable by Either Temperature or Current
  • Single Mode Fiber, FC/APC Connector (PMF available on request)
  • Available Mounted and Calibrated in a DX-1 Low Noise Current & Temperature Controller (Request Details)

Price and Delivery Quote

You will receive factory-direct price with no mark-ups

Technical Questions for this Product

ASK AN ENGINEER

Questions route directly to the correct Product Engineer

Customers Also Considered:

Why do Scientists & Engineers Choose Laser Lab Source?

MODEL RLS/EP1310
PRICE Request Price
Optical Specifications
  • Center Wavelength: 1305 nm
  • Available Center Wavelengths: 1300 nm - 1320 nm
  • Wavelength Tolerance: +/- 2 nm
  • CW Output Power (typical): 14.5 mW (out of fiber)
  • SMSR (typical): >40 dB
  • Optical Linewidth (typical): < 2 MHz
  • Temperature Tuning Coefficient (typical): 0.10 nm/°C
  • Current Tuning Coefficient (typical): 11.5 pm/mA
  • Slope Efficiency (typical): 0.21 mW/mA
Electrical Specifications
  • Operating Current: 80 mA
  • Operating Voltage: < 2.5 Volts
  • Threshold Current (typical): 10 mA
  • TEC Current: < 1.2 Amps
Laser Diode Package / Fiber Pigtail / Connector
  • Butterfly Package
  • Integrated TEC & 10K Thermistor
  • Integrated Optical Isolator
  • Single Mode Fiber, FC/APC Connector (PMF available on request)

Product Overview:

1310nm DFB Single Mode / Single Frequency Laser Diode, 14.5mW

Eblana's DFB laser is built using discrete-mode (DM) technology, delivering a cost-effective laser diode with mode-hop free tuneability, excellent SMSR, and narrow linewidth. Eblana Photonics EP1310-DM-B laser diode series is available at a range of wavelengths from 1300 - 1320 nm.

1310nm for High Performance Communications Applications

Eblana's 1310 nm DM Laser delivers unrivalled 10 Gbps performance at affordable pricing compared to conventional DFB technology. Its strained quantum well InAlGaAs composition provides for reliable, mode-hop free, uncooled operation over a wide operating temperature range. These single longitudinal mode lasers are designed specifically for use in communications and sensing applications, including FTTX, PON, and datacomms systems: 10 GbE (Gigabit Ethernet); SDH STM-64, SONET OC-192, 10G FC fiber channel.

Available Preconfigured Driver Maximizes Cost Effectiveness

Eblana's proprietary DX-1 incorporates the butterfly laser module with an integrated current driver and TEC controller. Designed for ease of operation, it is the ideal platform for high stability gas detection or remote sensing. The driver module is compact, at 72.5 mm x 50 mm x 28 mm, to fit within your system hardware and simplifies your design work considerably.

Features of the DX-1 Laser Diode Driver
    - Integrated driver and TEC controller
    - PM/SMF coupled with FC/APC
    - Built-in optical isolator
    - Powered by +5 V DC source


Important Notes on Operating Laser Diodes:

Electrical Operation: Operating a laser diode above the maximum ratings shown on the data sheet even for very short periods of time can damage the laser diode or reduce its lifetime. They should be electrically biased with a "laser diode driver" class current supply with low electrical noise and protection against voltage and current surges. Laser diodes are very sensitive to electrostatic discharge (ESD). Proper ESD precautions must be taken.

Mounting and Temperature Control: In order to maintain the lifetime of a laser diode, proper heat management is essential. Due to the design of the laser diode, heat is typically dissipated only through the base plate of the diode‘s package. A proper heat conducting interconnection between the diodes base plate and the heat sink must be maintained. Some devices require the use of a thermo-electric temperature controller (TEC controller) to remove the heat from the laser and stabilize the temperature.

Why do Scientists & Engineers Choose Laser Lab Source?

  • Get DIRECT, Fast Tech-Support from the Product Engineer, No Sales Person in the Middle

  • Get the Lowest Price, Factory Direct, No Mark-Up's, Suppliers Post their Own Price

  • Get a 30 Day Evaluation Period with No Risk Return on Most Products, Check Availability