Home  >  Wavelengths 370nm-561nm  >  OsTech   >  LDX-375NM-150MW

 

375nm, 150mW Fiber-Coupled Laser Diode in Pre-Configured Control & Mount System:
- 150mW Output Power
- User Replaceable Laser Diode

  • 375nm Laser Diode, Fiber-Coupled Output
  • 375nm Laser Diode Source System Display
  • labview drivers
  • 375nm-infographic-6-6

$7726.00  
sku / item#: LDX-375NM-150MW
ships: Request a Quote for Current Ship Date

Key Features
  • SIMPLE TO OPERATE: System ships with 375nm laser diode installed and tested in pre-configured control and mounting system (Driver / Temp. Controller + Mount + Cables)
  • FLEXIBLE: User can remove and replace the laser diode in the future as needed
  • INSTALLATION SUPPORT: Get up and running fast with unlimited phone & email tech-support; see contact info in the images section to the left
                            ---------------------------
  • User Adjustable Laser Output Power 0 to 150 mW
  • Peltier-Cooled Laser Diode, Air-Cooled Heat Sink
  • User has Full Control of All Laser Diode Parameters
  • RS232 Interface, Optional USB Control Available

Price and Delivery Quote

Buy Now / Add to Cart

Technical Questions for this Product

ASK AN ENGINEER

Customers Also Considered:

Why do Scientists & Engineers Choose Laser Lab Source?

MODEL LDX-375NM-150MW
PRICE $7726.00
Laser Diode Specifications (typical @ 25°C)
  • Output Power, CW (minimum): 150 mW
  • Center Wavelength: 375 nm (±10 nm)
  • Spectral Width (FWHM): 2.0 nm (typ)
  • Output Emission Spectra: Multimode
  • Operating Current: 390 mA
  • Operating Voltage: 5.0 V
Laser Diode Fiber Output Specifications
  • Core Diameter: 105 µm
  • Detachable Fiber Connector: SMA905
CONTROL UNIT LASER DIODE PROTECTION FEATURES
  • Adjustable Pre-Set Maximum Current Limit
  • Adjustable Pre-Set Temperature Limit
  • Soft-Start Current Ramp Factory Default Set to 300 Milliseconds
  • Soft-Start Current Ramp to Setpoint (User Programmable)
  • ESD and Power Surge Clamp Reverse Voltage
  • Reverse Voltage Transient Clamp
  • AC Line Filter
  • Keylock Switch and Safety Interlock
  • Short Circuit when Laser Diode Current Turned OFF
  • Open Circuit Detection
Air-Cooled Mount and Cable Features
  • Laser Mounting Area (total): 75mm x 60mm
  • Laser Mounting Plate Footprint: Machined for Included Laser Diode
  • Includes 1.5 meter Current Interface Cable (20 Amp rated)
  • Includes 1.5 meter TEC Controller Interface Cable
  • Waste Heat Removed by Fan Embedded in Heat Sink Block
  • Heat Sink Fan Driven by Temperature Controller Unit
USER INTERFACE
  • Front Panel LCD, Full Alphanumeric Display with Key Pad
  • RS232 Standard, LabView Drivers Included
  • USB Optional; Inquire
  • GUI Control Software Included
Control Unit MODULATION and Slow Pulse (QCW) SPECIFICATIONS
  • Modulation Bandwidth: DC ~ 25 kHz
  • Modulation Signal: Accepts External Digital (TTL) or Analog
  • Modulation Input Connector: BNC, Input Impedance 10 kΩ
  • QCW Pulse Rise and Fall Time: < 20 μs to CW (< 10 μs on request)
  • QCW Trigger: Internal Function Generator or External Trigger
  • QCW Pulse Time Base Accuracy: ± 1.0%
  • ---------------------------------------------------------------------------------------------
  • Modulation Input Voltage Range: 0 ~ 4 Volts (4V = Max Current)
  • Analog Modulation Bandwidth: 1 Hz – 20 kHz
control unit dIMENSIONS and power requirement
  • Power Input: Universal 100 ~ 230 VAC, 50/60 Hz
  • Controller Dimensions: 200mm x 105mm x 85mm
  • Mount Dimensions: 62mm x 89mm x 119mm

Product Overview:

375nm, 150mW Fiber Coupled Laser Diode Source with Control System Overview

The LDX-375NM-150MW includes a fiber coupled 375 nm, 150 mW laser diode installed and tested in an all-inclusive control system: the control system includes a precision current source and temperature controller, laser diode mount with the heat sink and all interconnect cables. These systems are a convenient, high performance 375nm system for R&D applications in lab environments.

The fiber-coupled 375nm sources are offer high efficiency and robust thermal design structure. They are designed to yield lifetimes of thousands of hours at full rated power. The fiber-coupled HHL package is mounted to the pre-configured heat sink for highly stable thermal control using a 10K Ohm thermistor and TEC cooler to provide active heat control of the package. The laser features an SMA905 detachable fiber connector which is designed for 105µm multimode UV fiber patch cable.

Modulation and Internal Function Generator Features

In addition to standard DC continuous wave mode of operation, these units offer an external modulation input and circuitry. They will accept either TTL or analog modulation from DC to 25 kHz. The modulation input is a BNC connector on the rear panel of the controller. The controller also includes an internal function generator which can be used to generate the modulation signal or QCW pulses from 20 μs to CW. The user has the option of using the internal function generator or triggering from an external generator.

User has Complete Control of the 375nm Laser Diode

The user has complete control of the 150mW laser diode through the front panel or through the rear panel RS232 interface (optional USB is available; please inquire). The user controls the bias current, temperature set-point, CW or modulated mode and several other parameters. The front panel has an LCD display with a touch key-pad. The menu structure is simple to operate, and features a status menu with current and actual temperature for the default home page setting.

Why do Scientists & Engineers Choose Laser Lab Source?

  • Get DIRECT, Fast Tech-Support from the Product Engineer, No Sales Person in the Middle

  • Get the Lowest Price, Factory Direct, No Mark-Up's, Suppliers Post their Own Price

  • Get a 30 Day Evaluation Period with No Risk Return on Most Products, Check Availability