Home  >  Wavelengths 800nm-895nm  >  OsTech   >  LDX-808NM-50W

 

Turn-Key 808nm, 50 Watt Laser Diode Source & Control System; User Adjustable Output Power

  • DILAS 50W 808nm Laser Diode
  • 808nm DILAS High Power Laser Diode Rear Panel
  • DILAS Coherent Laser 808nm 50W Laser Diode
  • 808nm 50W Laser Diode
  • LabView Drivers Screen Shot

$6985.00   Ships: 4 weeks | Model LDX-808NM-50W

Key Features
  • Includes DILAS Fiber Coupled Laser Diode Module
  • 0 to 50 Watts (CW), User Adjustable Output Power
  • Peltier (TEC) & Fan Cooled System (No Water)
  • 400 µm. 0.22 NA Fiber Rear Panel Output
  • CW Mode, or QCW < 25 μs - CW
  • Manufactured by OsTech, offered by Laser Lab Source

Price and Delivery Quote

You will receive factory-direct price with no mark-ups

Technical Questions for this Product

ASK AN ENGINEER

Questions route directly to the correct Product Engineer

Why do Scientists & Engineers Choose Laser Lab Source?

  • NO SALES PERSON. Get direct access to the correct product ENGINEER. learn more »

  • NO MARK-UP's. Manufacturer's set their own lowest direct pricing. learn more »

  • LEADING BRANDS. We make it simple to buy from top Global suppliers. learn more »

Customers Also Considered:

MODEL LDX-808NM-50W
PRICE $6985.00
Optical OUTPUT: Laser Diode Specifications (typical @ 25°C)
  • Laser Center Wavelength: 808nm (+/-3 nm)
  • Laser Output Power Range: 0 - 50 Watts (user adjustable)
  • Laser Slope Efficiency: > 0.85 W/A
  • Laser Spectral Line Width (FWHM): 4 nm
  • Laser Wavelength Temperature Tuning: 0.27 nm/°C
  • Laser Fiber Termination: SMA905 (rear panel output)
  • Laser Fiber Numeric Aperture: 0.22
  • Laser Fiber Core Diameter: 400 µm
  • DILAS Laser Diode Source Module Model: M1F-SS2.1
CONTROL UNIT CURRENT & VOLTAGE specifications
  • Laser Diode Bias Current Range: 0.00 - 80.00 Amps
  • Laser Diode Bias Voltage Range: 5.00 Volts
  • Current Source Noise & Ripple (rms): < ± 0.5% ( of full scale current )
  • Current Source Setpoint Resolution: 20 mA
  • Current Source Setpoint Accuracy: ± 0.5%
  • Current Source Stability (4 hours): ≤ 300 ppm
  • Current Source Limit Setpoint Accuracy: ± 2%
  • Photodiode Current Measurement Accuracy: ± 0.5%
  • Photodiode Current Measurement Range: 0.00 - 4,000 μA
CONTROL UNIT LASER DIODE PROTECTION FEATURES
  • Soft-Start Current Ramp to Setpoint (User Programmable)
  • Soft-Start Current Ramp Factory Default Set to 300 Milliseconds
  • Factory Pre-Set Maximum Current Limit
  • Factory Pre-Set Upper Temperature Limit
  • ESD and Power Surge Clamp
  • Reverse Voltage Transient Clamp
  • AC Line Filter
  • Keylock Switch and Safety Interlock
  • Short Circuit when Laser Diode Current Turned OFF
  • Front Panel e-Stop Button Emergency Shut-Down
  • Factory Pre-Set Upper Temperature Limit
  • Open Circuit Detection and Fast Shut-Down
CONTROL UNIT TEMPERATURE CONTROLLER and TEC cooled laser diode mounting plate Specifications
  • Cooling Design: Peltier (TEC) Cooled Laser Diode Mounting Plate
  • Laser Diode Mounting Plate Material: Nickel Plated Copper
  • Laser Diode Mounting Plate Thermal Resistance: < 0.06 K/W
  • TEC Controller Output Power Total: 336 Watts
  • TEC Controller Output Current Range (bipolar): ± 7.00 Amps
  • TEC Controller Output Voltage Range (bipolar) : ± 48.00 Volts
  • Laser Temperature Setpoint: User Adjustable within Factory Pre-Set Range (Upper Limit Pre-Set to Protect Laser)
  • TEC Control Loop Algorithm: Full P.I.D.
  • P.I.D. Variables: Factory Pre-Set for Optimum Performance
  • Temperature Control Accuracy: 0.05°C
  • TEC Controller Setpoint Resolution: 0.01°C
  • Laser Diode Upper & Lower Temperature Limits: Factory Pre-Set
  • Control Unit Waste Heat Removed by Fan
QCW PULSING MODE and MODULATION specifications
  • QCW Pulse Rise and Fall Time: < 25 μs to CW (< 10 μs on request)
  • QCW Trigger: Internal Function Generator or External Trigger
  • QCW Pulse Modes: Continuous Pulses, Single Pulses, Bursts
  • Pulse Time Base Accuracy: ± 1.0%
  • MODULATION Signal: Accepts External Digital (TTL) or Analog
  • MODULATION Input Connetor: BNC, Input Impedance 10K ohm
  • MODULATION Input Voltage Range: 0 ~ 4 Volts (4V = Max Current)
System Dimensions and Power Requirement
  • Height: 2U (rack units)
  • Depth: 260 mm
  • Width: 48.26 cm (Standard 19 Inch Rack Width)
  • Input Power: Universal 100V ~ 230 VAC, 50/60Hz
  • Includes Front Panel Mounting Brackets and Bottom Panel Feet
User Interface
  • Front Panel LCD, Full Alphanumeric Display with Key Pad
  • RS232 Standard
  • USB Optional ($100.00)
  • LabView Drivers Included
  • GUI Control Software Included
  • Terminal Control Software Program Included

Product Overview:

The LDX808-50W series instruments are high power laser diode source and control systems which are fully integrated turn-key bench top or rack mount source solutions. An integrated 50 Watt 808nm fiber coupled module from DILAS (also available with LUMICS source) is precisely controlled and delivers a high stability output.

These all-inclusive high power systems include a fiber coupled laser diode module, precision high power laser diode current source, 336 watt temperature controller and TEC / Peltier cooled laser mounting plate assembly integrated into a 19 inch rack-mount enclosure.

High Power Laser Diode Source Protection:
High power laser diode protection features include a factory pre-set current limit, slow start current ramp to the user specified set point, factory pre-set temperature limits and clamping circuitry to protect the laser against power surges. The factory set default maximum current level is set during the calibration process to ensure the laser is not over-driven and damaged. The temperature limits are determined during calibration and are also factory set within a safe operating range to protect the laser against over-heating.

User Set Soft-Start Current Ramp:
In addition to the current the temperature limit protection settings, the user has the option of setting the soft-start current ramp time from 300 milliseconds up to 10 seconds. The system is set to a 300 millisecond ramp as the default mode for shipment. This user adjustable current ramp allows you to customize the "power on" sequence of the source for your specific application.

Air-Cooled Thermal Control System:
These units have an integrated high power TEC temperature controller with a full P.I.D. control loop to deliver fast and efficient heat removal from the source laser module. The laser diode is mounted on a Peltier / TEC cooled, nickel plated copper mounting plate. The mounting plate offers very high surface finish and flatness for low thermal impedance. The cooled mounting plate for the laser is attached to a fan cooled air duct to remove the waste heat and keep the laser temperature stable.

User Controls:
Users have full control of the fiber coupled laser module power through a touch-key front panel menu and LCD display or through the digital interface. You control the high power laser diode amplitude by adjusting the current level or adjusting the laser in automatic power (APC) control mode (Watts of optical power) based on the internal monitor photodiode feedback to the bias current and temperature controller. These systems can be controlled remotely by RS232 or USB. They ship with LabView drivers and a terminal control software programming suite. All systems have both digital and analog modulation control inputs.

Why do Scientists & Engineers Choose Laser Lab Source?

  • Get DIRECT, Fast Tech-Support from the Product Engineer, No Sales Person in the Middle

  • Get the Lowest Price, Factory Direct, No Mark-Up's, Suppliers Post their Own Price

  • Get a 30 Day Evaluation Period with No Risk Return on Most Products, Check Availability