Home  >  Wavelengths 1310nm-1690nm  >  Fibercom Ltd.  >  RLS/FB-S1600-40SOT148

 

1600 nm, 40 mW Fabry-Perot Laser Diode

  • 1600nm-laser-diode-fibercom

$635.00   ships: 2 weeks | item#: RLS/FB-S1600-40SOT148

Key Features
  • Peak Wavelength 1600 nm (±20) nm
  • CW Optical Output Power 40 mW
  • Operation Current <250 mA
  • Offered by: FiberCom, a Laser Lab Source Marketplace Seller
  • Sold & Supported in North America by: LaserDiodeSource.com, part of the
    Laser Lab Source Marketplace Group

Price and Delivery Quote

You will receive factory-direct price with no mark-ups

Technical Questions for this Product

ASK AN ENGINEER

Questions route directly to the correct Product Engineer

Customers Also Considered:

Why do Scientists & Engineers Choose Laser Lab Source?

MODEL RLS/FB-S1600-40SOT148
PRICE $635.00
Key Specifications
  • Peak Wavelength: 1600±20 nm
  • CW Optical Output Power: 40 mW
  • Operation Current: <250 mA
  • Operation Voltage: 0.9±0.15 V
  • Threshold Current: <50 mA
  • Beam Divergence (FWHM): 15±2 degree
  • Beam Divergence (FWHM): 50±5 degree
  • Spectrum Half-Width (FWHM): <3.5 nm
  • Emitting Area: 5x1 µmxµm
  • Operation Mode: Continuous Wave Pulse, τ>5 ns
  • PD Monitor Current: 1-1000 µA
  • PD Reverse Voltage: 9 V
  • Refer to Datasheet for additional specifications

Product Overview:

1600 nm, 40 mW Fabry-Perot Laser Diode Overview

TO-Can laser diode from FiberCom. Laser diode is a Fabry-Perot and features a spectral width of +/-3.5nm. Integrated photodiode allows for APC (automated power control) mode of operation and laser can be operated in CW or pulsed mode. In pulse mode the laser can have a pulse width less than 5ns. Laser diode output power up to 40mW with a wavelength of 1600nm.

Proper Handling and Operation of Diode Lasers

Diode lasers are highly susceptible to damage from ESD and from temperatures exceeding their specified safe operating range. The user is advised to use care and proper ESD safety practices when handling them to avoid damage to the laser. A properly rated low noise current source, a low thermal resistance mount and a temperature controller should be used for optimal device performance and reliability.

Why do Scientists & Engineers Choose Laser Lab Source?

  • Get DIRECT, Fast Tech-Support from the Product Engineer, No Sales Person in the Middle

  • Get the Lowest Price, Factory Direct, No Mark-Up's, Suppliers Post their Own Price

  • Get a 30 Day Evaluation Period with No Risk Return on Most Products, Check Availability