Home  >  Wavelengths 900nm-1190nm  >  OsTech   >  LDC-500X

 

14 Amp Laser Diode Control Electronics and Mounting System for High Power Fiber Coupled Pumps

  • Laser Diode Controller System
  • Heat Sink for Laser Diodes 50W
  • Rear Panel Diagram of Laser Diode Controller
  • laser diode controller rear panel connector view
  • laser diode controller labview drivers

$3350.00   Ships: 2 weeks | Model LDC-500X

Key Features
  • All-Inclusive Control Electronics and Mounting System with Pre-Configured Mounting Plate for Your Laser Diode Package Style
  • Current & TEC Controller + Cooled Mount + Cables
  • Precision 14 Amp Current Source with 112 Watt TEC / Peltier Temperature Controller
  • Standard Models Available for Lumics and Lumentum 2-Pin Laser Diodes and Many other Fiber Coupled Packages
  • USB and LabView Drivers Available
  • Manufactured by OsTech, Offered by Laser Lab Source Worldwide

Price and Delivery Quote

You will receive factory-direct price with no mark-ups

Technical Questions for this Product

ASK AN ENGINEER

Questions route directly to the correct Product Engineer

Why do Scientists & Engineers Choose Laser Lab Source?

  • NO SALES PERSON. Get direct access to the correct product ENGINEER. learn more »

  • NO MARK-UP's. Manufacturer's set their own lowest direct pricing. learn more »

  • LEADING BRANDS. We make it simple to buy from top Global suppliers. learn more »

Customers Also Considered:

MODEL LDC-500X
PRICE $3350.00
laser diode CURRENT SOURCE
  • Output Current Range: 0.00 - 14.00 Amps
  • Compliance Voltage Range: 0.10 - 6.00 Volts
  • Current Noise & Ripple (rms): < 1% of Full Scale Current
  • Current Setpoint Resolution: 5.0 mA
  • Current Setpoint Accuracy: ± 0.5%
  • Current Stability (4 hours): ≤ 100 ppm (@ full scale)
  • Current Limit Setpoint Accuracy: ± 2%
  • Photodiode Current Measurement Accuracy: ± 0.5%
  • Photodiode Current Measurement Range: 0.00 - 700 μA
Thermoelectric (TEC) TEMPERATURE CONTROLLER
  • TEC Output Power Total: 112 Watts
  • TEC Output Current Range (bipolar): ± 8.00 Amps
  • TEC Output Voltage Range (bipolar) : ± 14.00 Volts
  • Temperature Sensor Inputs: 10 kΩ Thermistor, NTC, PT100, PT1000
  • TEC Control Loop Algorithm: Full P.I.D.
  • P.I.D. Variables: User Adjustable to Optimize Temp. Settling Speed
  • TEC Setpoint Resolution: 0.01°C
  • TEC Output Stability: ± 0.01°C (subject to ambient temp. stability)
  • Temperature Range: -25°C to 150°C
  • Factory Set Default Lower Temperature Limit: 5°C
  • Factory Set Default Upper Temperature Limit: 35°C
MOUNTING PLATE, HEAT SINK & CABLES
  • Cooling Method: TEC-Peltier Cooler, Fan for Waste Heat Removal
  • TEC Rating (max): 9 Amps, 17 Volts
  • Heat Sink Thermal Load Maximum: 38 Watts (@25ºC)
  • Fan Rated Input Voltage 24 VDC (supplied by controller)
  • Fan Rated Input Current: 300 mA (supplied by controller)
  • Mounting Plate Material: Anodized Aluminum
  • Mounting Plate Area: 105 mm x 75mm
  • Mounting Plate Hole Footprint: Customer Specified Package Style
  • Mounting Plate Integrated Thermistor: 10 kΩ
  • Electrical Connector to Controller: DSUB, 15-pin
  • System Includes 1 x 1.5 meter Current Interface Cable (50A rated)
  • System Includes 1 x 1.5 meter TEC Control Interface Cable (20A rated)
MODULATION & QCW PULSE MODE
  • Internal Pulse Generator QCW Pulse Width Rise Time: 20 μsec to CW
  • Pulse Time Base Accuracy: ± 1.0%
  • QCW MODE 1: User Adjustable Pulse Width and Repetition Rate using Internal Pulse Generator
  • QCW MODE 2: External Trigger to Internal Pulse Generator: Rising Edge Triggered QCW Pulse with Internally Adjusted Pulse Width
  • MODULATION Input (BNC): Digital (TTL) or Analog
  • MODULATION BNC Input Impedance: 10K ohm MODULATION Input
  • MODULATION Input Voltage Range: 0 ~ 4 Volts (4V = Max Current)
INTEGRATED laser diode PROTECTION FEATURES
  • User Programmable Soft-Start Current Ramp to Setpoint
  • Soft-Start Current Ramp Default Set to 300 Milliseconds
  • Current Limit
  • Temperature Limits (Upper and Lower)
  • Open Circuit Detection
  • Short Circuit when Laser Diode Current Turned OFF
  • ESD and Power Surge Clamp
  • Reverse Voltage Transient Clamp
  • Factory Pre-Set Default Upper Temperature Limit: 35°C
  • AC Line Filter
  • Rear Panel Keylock Switch and Interlock
Controller Computer Interface
  • RS232 Standard
  • USB Optional: $95.00 (Option SVC-USB)
  • LabView Drivers Included
Power Supply, Weight and Dimensions
  • Power Input: Universal 90 ~ 230 VAC, 50/60 Hz
  • System Weight (total): ~ 10 kg
  • Dimensions: 200mm x 105mm x 85mm
Laser diode package style part numbers
  • LDC-500X/L4 (Lumentum L4)
  • LDC-500X/TO-220 (Lumics 2-Pin)
  • LDC-500X/HHL (Fiber Coupled HHL)
  • LDC-500X/BMU (II-VI 2-pin)
  • LDC-500X/CS (Customer Specified - Contact Us)

Product Overview:

This high power control solution is an all-inclusive system for controlling high power single emitter pump laser diodes. It is optimized for 808nm ~ 980nm multimode fiber coupled pumps from companies such as Lumentum, Lumics and II-VI laser enterprise. This system includes a precision current source, a full PID temperature controller, an actively cooled heat sink and all required cables. The current source offers industry leading protection for your laser diode. The heat sink and TEC cooled mounting plate offer a high performance pre-configured mounting solution. The LDC-500X is an affordable, high performance solution for safely powering your laser and running at a stable temperature in laboratory environments. Standard mounting hole footprint patterns are available for many different module types. Refer to the specification table for common package type configurations. Or send us the data sheet for your laser and we will customize the mounting hole pattern on request.

Flexible Modulation, Internal Function Generator & QCW Pulse Modes:
In addition to CW (continuous wave) mode of operation, the 500X system includes flexible modulation capabilities and a slow pulse (QCW) mode. The rear panel of the controller has a BNC input for an analog or TTL digital modulation input with a 10K input impedance. The controller has an internal function generator which can be used to set the modulation signal or the quasi-CW pulses with a time base accuracy of 1.0%. In QCW mode, the user can also set the 20μs to CW pulses from a remote TTL signal source.

User Interface:
These systems come with a standard RS-232 interface and can be ordered with an optional USB interface. LabView drivers are available at no charge. A LabView GUI makes set-up and control of the system fast and simple. The user also has complete control through an intuitive front panel menu / LCD display with a key pad.

Why do Scientists & Engineers Choose Laser Lab Source?

  • Get DIRECT, Fast Tech-Support from the Product Engineer, No Sales Person in the Middle

  • Get the Lowest Price, Factory Direct, No Mark-Up's, Suppliers Post their Own Price

  • Get a 30 Day Evaluation Period with No Risk Return on Most Products, Check Availability