Home  >  Wavelengths 1310nm-1690nm  >  Fibercom Ltd.  >  RLS/FB-M1450-1500HO

 

1450nm, 1500mW Fabry-Perot HHL Laser Diode

  • 1450nm HHL Fabry-Perot Laser Diode

$771.00   ships: 2 weeks | item#: RLS/FB-M1450-1500HO

Key Features
  • Peak Wavelength 1450 nm (±10 nm)
  • CW Optical Output Power 1.5 W
  • Operation Current <4.5 A
  • Offered by: FiberCom, a Laser Lab Source Marketplace Seller
  • Sold & Supported in North America by: LaserDiodeSource.com, part of the
    Laser Lab Source Marketplace Group
Manufacturer/Seller, Shipping & Warranty Information

Price and Delivery Quote

You will receive factory-direct price with no mark-ups

Technical Questions for this Product

ASK AN ENGINEER

Questions route directly to the correct Product Engineer

Customers Also Considered:

Why do Scientists & Engineers Choose Laser Lab Source?

MODEL RLS/FB-M1450-1500HO
PRICE $771.00
Key Specifications
  • Peak Wavelength: 1450±10 nm
  • CW Optical Output Power: 1.5 W
  • Operation Current: <4.5 A
  • Operation Voltage: 1.1±0.1 V
  • Threshold Current: <9 A
  • Beam Divergence (FWHM): 16±3 degree
  • Beam Divergence (FWHM): 1±0.3 degree
  • Spectrum Half-Width (FWHM): <7 m
  • Emitting Area: 100x1 µmxµm
  • Operation Mode: CW, QCW, Pulse (τ>5ns)
  • Operation Temperature: 25 degree
  • PD Monitor Current: 1-1000 µA
  • PD Reverse Voltage: 9 V
  • Refer to Datasheet for Additional Specifications

Product Overview:

1450nm, 1500mW Fabry-Perot Laser Diode Overview

Fabry-Perot multimode laser diode, provides 1450nm output at 1500mW. Drive current is < 4.5 Amps. The high-heat load package includes integrated photodiode, as well as internal TEC and temperature sensor for increased stability and reliability.

Proper Handling and Operation of Diode Lasers

Diode lasers are highly susceptible to damage from ESD and from temperatures exceeding their specified safe operating range. The user is advised to use care and proper ESD safety practices when handling them to avoid damage to the laser. A properly rated low noise current source, a low thermal resistance mount and a temperature controller should be used for optimal device performance and reliability.

Why do Scientists & Engineers Choose Laser Lab Source?

  • Get DIRECT, Fast Tech-Support from the Product Engineer, No Sales Person in the Middle

  • Get the Lowest Price, Factory Direct, No Mark-Up's, Suppliers Post their Own Price

  • Get a 30 Day Evaluation Period with No Risk Return on Most Products, Check Availability