$425.00 sku / item#: LDS-1570-DFB-2.5G-15/45-B-2-SM1-FA-CW ships: Request a Quote for Current Ship Date
- Wavelength 1570 nm
- Linewidth < 500 kHz
- Optical power: 15mW (CW), 45mW (Pulse)
- FC/APC Connector; Single-Mode Fiber
- Sold and Supported by LaserDiodeSource.com, a division of Laser Lab Source
Price and Delivery Quote
Buy Now / Add to Cart
Technical Questions for this ProductASK AN ENGINEER
Customers Also Considered:
|OPTICAL CHARACTERISTICS (Typcial @ T = 25 °C)|
1570nm, 15mW CW / 45mW Pulse, Fiber Coupled Laser Diode
LDS-1570-DFB-2.5G-15/45-B-2-SM1-FA-CW is an InGaAsP MQW laser diode with internal photodiode, coupled to an optical fiber and packaged into a hermetic TO-case. This compact coaxial laser is mounted in a double-sided bracket to facilitate mounting and heat-sinking. The special feature of the LDS technology is the increased thermal stability of optical power.
• Wavelength: 1570 nm
• Cavity type: DFB
• Linewidth < 500 kHz
• Data rate up to 2.5 Gbps
• Optical power: up to 15 mW in CW mode and up to 45 mW in pulse mode in the single-mode fiber G.657.A1
• Typical thermal stability of optical power (tracking error) 0.15 dB
• Package types: coaxial
• Built-in monitor photodiode
Important Notes on Operating Laser Diodes:
Electrical Operation: Operating a laser diode above the maximum ratings shown on the data sheet even for very short periods of time can damage the laser diode or reduce its lifetime. They should be electrically biased with a "laser diode driver" class current supply with low electrical noise and protection against voltage and current surges. Laser diodes are very sensitive to electrostatic discharge (ESD). Proper ESD precautions must be taken.
Mounting and Temperature Control: In order to maintain the lifetime of a laser diode, proper heat management is essential. Due to the design of the laser diode, heat is typically dissipated only through the base plate of the diode‘s package. A proper heat conducting interconnection between the diodes base plate and the heat sink must be maintained. Some devices require the use of a thermo-electric temperature controller (TEC controller) to remove the heat from the laser and stabilize the temperature.
Why do Scientists & Engineers Choose Laser Lab Source?
Get DIRECT, Fast Tech-Support from the Product Engineer, No Sales Person in the Middle
Get the Lowest Price, Factory Direct, No Mark-Up's, Suppliers Post their Own Price
Get a 30 Day Evaluation Period with No Risk Return on Most Products, Check Availability