Home  >  Wavelengths 1700nm-1950nm  >  Fibercom Ltd.  >  RLS/FB-S1750-40SOT148

 

1750 nm, 20 mW Fabry-Perot Laser Diode

  • 1750nm Fabry-Perot Laser Diode

$708.00   ships: 2 weeks | item#: RLS/FB-S1750-40SOT148

Key Features
  • Center Wavelength: 1750nm (±20 nm)
  • 40mW CW Optical Output Power
  • Integrated Photodiode
  • Small Package: 9mm TO-can
  • Offered by FiberCom, a Laser Lab Source Marketplace Seller
  • Sold & Supported in North America by: LaserDiodeSource.com, part of the
    Laser Lab Source Marketplace Group

Price and Delivery Quote

You will receive factory-direct price with no mark-ups

Technical Questions for this Product

ASK AN ENGINEER

Questions route directly to the correct Product Engineer

Customers Also Considered:

Why do Scientists & Engineers Choose Laser Lab Source?

MODEL RLS/FB-S1750-40SOT148
PRICE $708.00
OPTICAL
  • Center Wavelength (typ): 1750 nm
  • Wavelength Tolerance: 1750 nm (+/- 20nm)
  • Optical Output Power (max): 40mW
  • Beam Divergence Parallel to Junction: 5°(min) ~ 25°(max)
  • Beam Divergence (FWHM): 10° ±2° (parallel)
  • Beam Divergence (FWHM): 44° ±3° (perpendicular)
ELECTRICAL
  • Threshold Current (max): 70mA
  • Operating Current (typ): 300mA
  • Operating Voltage (max): 1.1V
  • PD Monitor Current: 1-100 µA
  • PD Reverse Voltage: <5 Volts

Product Overview:

1750nm, 40mW Fabry-Perot Laser Diode Overview

These 1750nm Fabry-Perot laser diodes are manufactured by Fibercom in a TO-9 package. The rated output power in continuous wave (CW) operation is 40mW and these lasers can be pulsed for higher output power. The operating current is less than 300mA with a threshold at 70mA. The integrated photodiode allows for constant power control with compatible laser diode driver. The photodiode current is up to 100 µA.

Proper Handling and Operation of Diode Lasers

Diode lasers are highly susceptible to damage from ESD and from temperatures exceeding their specified safe operating range. The user is advised to use care and proper ESD safety practices when handling them to avoid damage to the laser. A properly rated low noise current source, a low thermal resistance mount and a temperature controller should be used for optimal device performance and reliability.

Why do Scientists & Engineers Choose Laser Lab Source?

  • Get DIRECT, Fast Tech-Support from the Product Engineer, No Sales Person in the Middle

  • Get the Lowest Price, Factory Direct, No Mark-Up's, Suppliers Post their Own Price

  • Get a 30 Day Evaluation Period with No Risk Return on Most Products, Check Availability