Home  >  Wavelengths 600nm-795nm  >  OsTech   >  LDX-635NM-5W


635nm, 105µm Fiber-Coupled Laser Diode in Pre-Configured Control & Mount System:
- 5 Watt Output Power
- User Replaceable Laser Diode

  • 635nm laser diode
  • 635nm laser diode
  • 635nm laser diode 5W, rear view
  • 635nm Laser Diode System Controller Front Panel
  • ldx-system-quick-start
  • 635nm-5w-laser-diode-infographic
  • 635nm laser diode infographic

sku / item#: LDX-635NM-5W
ships: Request a Quote for Current Ship Date

Key Features
  • User Adjustable Laser Output Power 0 to 5 Watts
  • User has Full Control of All Laser Diode Parameters
  • Peltier Cooled Laser Diode Mount Fully Configured for Laser Diode
  • ------------------------------------------------------------------------
  • SIMPLE TO OPERATE: System ships with 635nm laser diode installed and tested in pre-configured control and mounting system (Driver / Temp. Controller + Mount + Cables)
  • FLEXIBLE: User can remove and replace the laser diode in the future as needed
  • INSTALLATION SUPPORT: Get up and running fast with unlimited phone & email tech-support; see contact info in the images section to the left

Price and Delivery Quote

Technical Questions for this Product


Customers Also Considered:

Why do Scientists & Engineers Choose Laser Lab Source?

PRICE $6835.00
635nm Laser Diode Specifications
  • Output Power, CW: 0 - 5 Watts, User Adjustable
  • Center Wavelength: 635 nm (±5 nm)
  • Spectral width, FWHM: < 3 nm
635nm Laser Diode Fiber Specifications
  • Fiber Core Diameter: 105 µm
  • Fiber NA: 0.22
  • Fiber Connector: SMA905
  • Factory Pre-Set Maximum Current Limit
  • Factory Pre-Set Upper Temperature Limit
  • Soft-Start Current Ramp Factory Default Set to 300 Milliseconds
  • Soft-Start Current Ramp to Setpoint (User Programmable)
  • ESD and Power Surge Clamp Reverse Voltage
  • Reverse Voltage Transient Clamp
  • AC Line Filter
  • Keylock Switch and Safety Interlock
  • Short Circuit when Laser Diode Current Turned OFF
  • Open Circuit Detection
Control Unit TEC Controller Specifications
  • Cooling Design: Peltier (TEC) Cooled Laser Diode Mounting Plate
  • TEC Control Loop Algorithm: Full P.I.D.
  • Temperature Range: -25°C to 150°C
  • Pre-Set Temperture Control Range: 15 °C - 30 °C
  • Cooling Method: TEC/Peltier Coolers, Fan for Waste Heat Removal
  • Laser Mounting Plate Area: 58 mm x 52 mm
  • Heat Sink Dissipation Capacity @ 25°C: 38 Watts
  • System Includes 1.5 meter Current Interface Cable (20A rated)
  • System Includes 1.5 meter TEC Control Interface Cable
  • Front Panel LCD, Full Alphanumeric Display with Key Pad
  • RS232 Standard, LabView Drivers Included
  • USB Optional; Inquire
  • GUI Control Software Included
Control Unit QCW and Modulation SPECIFICATIONS
  • QCW Pulse Width: 20 μs to CW
  • Pulse Time Base Accuracy: ± 1.0%
  • QCW Mode 1: User Adjustable Pulse Width and Repetition Rate using Internal Pulse Generator
  • QCW Mode 2: External Trigger to Internal Pulse Generator, Rising Edge Triggered
  • Modulation Input (BNC): Digital (TTL) or Analog Modulation
  • Modulation BNC Input Impedance: 10K ohm
  • ---------------------------------------------------------------------------------------------
  • Modulation Input Voltage Range: 0 ~ 4 Volts (4V = Max Current)
  • Analog Modulation Bandwidth: 1 Hz – 20 kHz
  • Power Input: Universal 100 ~ 230 VAC, 50/60 Hz
  • System Weight (total): ~ 10 kg
  • Controller Dimensions: 275mm x 200mm x 127mm

Product Overview:

635nm, 5 Watt, Turn-Key System Description

These 635nm, 5 Watt source and control systems offer a complete plug and play solution for R&D applications. The LDX-635NM-5W is a pre-configured and fully calibrated system. It includes the high power fiber coupled laser diode, the controller, the heat sink and Peltier cooled mounting plate, and all interface cables.

These systems are a convenient, high performance 635 nm multi-mode laser diode source and control solution for research and development in lab environments.

High Power Laser Diode Source Protection

High power laser diode protection features include a factory pre-set current limit, slow start current ramp to the user specified set point, factory pre-set temperature limits and clamping circuitry to protect the laser against power surges. The factory set default maximum current level is set during the calibration process to ensure the laser is not over-driven and damaged. The temperature limits are determined during calibration and are also factory set within a safe operating range to protect the laser against over-heating. In addition to the current the temperature limit protection settings, the user has the option of setting the soft-start current ramp time from 300 milliseconds up to 10 seconds. The system is set to a 300 millisecond ramp as the default mode for shipment. This user adjustable current ramp allows you to customize the "power on" sequence of the source for your specific application.

User has Complete Control of the 635nm Laser Diode

The user has complete control of the 5W laser through the front panel of the control unit or through the rear panel digital I/O. The user controls the bias current, temperature set-point, CW or modulated mode and all other parameters. The controller front panel has an LCD display with a touch key-pad. The menu structure is simple to operate and features a status menu with current and actual temperature for the default home page setting. These systems come with an RS-232 interface and can be ordered with an optional USB interface (please inquire). LabView drivers are available free of charge charge, and the LabView GUI makes set-up and control of the system fast and simple.

QCW and Modulation Features

In addition to standard CW mode, these units offer an external modulation input and circuitry and an internal function generator for quasi-CW pulsing applications. The internal function generator is used to generate QCW pulses from 20 μs to CW. The controller will also accept an external signal for the QCW trigger. The modulation can be either TTL or analog modulation from DC to 50 kHz. The modulation input is a BNC connector on the rear panel of the controller.

635nm Laser Heat Sink and TEC Cooled Mounting Plate

The laser heat sink uses a combination of TEC based cooing with a fan for heat removal from the base of the heat sink. No water is required for cooling. These heat sinks have a mounting plate which is highly uniform and offers finish and flatness optimized for the 635nm fiber coupled modules.

Why do Scientists & Engineers Choose Laser Lab Source?

  • Get DIRECT, Fast Tech-Support from the Product Engineer, No Sales Person in the Middle

  • Get the Lowest Price, Factory Direct, No Mark-Up's, Suppliers Post their Own Price

  • Get a 30 Day Evaluation Period with No Risk Return on Most Products, Check Availability