Home  >  Wavelengths 1310nm-1690nm  >  LDT Laser Diode Technologies  >  FB-M1550-10SOT148

 

1550nm Laser Diode, 10mW Output Power

  • 1550nm Fabry-Perot Laser Diode TO-can
  • 1550nm-laser-diode-fibercom

$1060.00  
sku / item#: FB-M1550-10SOT148
ships: Request a Quote for Current Ship Date

Key Features
  • Peak Center Wavelength: 1550 ± 30nm
  • CW Optical Output Power: 10mW
  • Integrated Monitor Photodiode
  • Single Mode
  • TO-Can (9mm) Package
  • Sold and Supported by LaserDiodeSource.com, a division of Laser Lab Source

Price and Delivery Quote

Buy Now / Add to Cart

Technical Questions for this Product

ASK AN ENGINEER

Customers Also Considered:

Why do Scientists & Engineers Choose Laser Lab Source?

MODEL FB-M1550-10SOT148
PRICE $1060.00
SPECIFICATIONS
  • Peak Wavelength: 1550 ± 30nm
  • CW Optical Output Power: 10 mW
  • Operation Current: < 80 mA
  • Operation Voltage: 1 ±0.3 V
  • Threshold Current: < 40 mA
  • Beam Divergence Parallel (FWHM): 22 ±2 degree
  • Beam Divergence Perpendicular (FWHM): 44 ±2 degree
  • Spectrum Half-Width (FWHM): < 3.5 nm
  • Emitting Area: 5 x 1µm
  • Wavelength Temperature Coefficient: 4 +/- 0.5 nm/degree
  • Operation Power Temperature Coefficient: 0.1 ±0.05 mW/degree
  • Operation Current Temperature Coefficient: 0.6 ±0.05 mA/degree
  • Operation Temperature: 25 degrees +/- 20 degrees
  • Operation Mode: Continuous Wave
  • Pulse: τ > 5 ns
  • Monitor Current: 1-1000 µA
  • Refer to datasheet for additional specifications

Product Overview:

1550nm Laser Diode, 10mW Output Power Overview

These 1550nm laser diodes offer optical output power up to 10mW. They are offered in a 9 mm package, with an integrated monitor photo-diode. The operation current for these devices is < 80 mA and they have a low threshold current level of < 40 mA.

Proper Handling and Operation of Diode Lasers

Diode lasers are highly susceptible to damage from ESD and from temperatures exceeding their specified safe operating range. The user is advised to use care and proper ESD safety practices when handling them to avoid damage to the laser. A properly rated low noise current source, a low thermal resistance mount and a temperature controller should be used for optimal device performance and reliability.

Why do Scientists & Engineers Choose Laser Lab Source?

  • Get DIRECT, Fast Tech-Support from the Product Engineer, No Sales Person in the Middle

  • Get the Lowest Price, Factory Direct, No Mark-Up's, Suppliers Post their Own Price

  • Get a 30 Day Evaluation Period with No Risk Return on Most Products, Check Availability