Home  >  Wavelengths 1310nm-1690nm  >  LDT Laser Diode Technologies  >  FB-M1550-2000HO


1550nm Laser Diode, 2W Output Power

  • 1550nm Fabry Perot Laser Diode FiberCom

sku / item#: FB-M1550-2000HO
ships: Request a Quote for Current Ship Date

Key Features
  • Peak Wavelength 1550 nm (±30) nm
  • CW Optical Output Power 2 W
  • Operation Current <5 A
  • Sold and Supported by LaserDiodeSource.com, a division of Laser Lab Source

Price and Delivery Quote

Buy Now / Add to Cart

Technical Questions for this Product


Customers Also Considered:

Why do Scientists & Engineers Choose Laser Lab Source?

MODEL FB-M1550-2000HO
PRICE $2390.00
Key Specifications
  • Peak Wavelength: 1550±30 nm
  • CW Optical Output Power: 2 W
  • Operation Current: <5 A
  • Operation Voltage: 1.1±0.1 V
  • Threshold Current: <0.6 A
  • Beam Divergence (FWHM): 15±3 degree
  • Beam Divergence (FWHM): 1 degree
  • Spectrum Half-Width (FWHM): <10 nm
  • Emtting Area: 100x1 µmxµm
  • Operation Mode: CW, QCW, Pulse (τ>5ns)
  • Operation Temperature: 25 degree
  • PD Monitor Current: 1-1000 µA
  • PD Reverse Current: 9 V

Product Overview:

1550nm Laser Diode, 2W Output Power Overview

High power telecommunication wavelength laser diode from Fibercom. Integrated into a HHL package with TEC and photodiode included in the laser diode package. Laser diode output is 1550nm at 2 Watts.

Important Notes on Operating Laser Diodes:

Electrical Operation: Operating a laser diode above the maximum ratings shown on the data sheet even for very short periods of time can damage the laser diode or reduce its lifetime. They should be electrically biased with a "laser diode driver" class current supply with low electrical noise and protection against voltage and current surges. Laser diodes are very sensitive to electrostatic discharge (ESD). Proper ESD precautions must be taken.

Mounting and Temperature Control: In order to maintain the lifetime of a laser diode, proper heat management is essential. Due to the design of the laser diode, heat is typically dissipated only through the base plate of the diode‘s package. A proper heat conducting interconnection between the diodes base plate and the heat sink must be maintained. Some devices require the use of a thermo-electric temperature controller (TEC controller) to remove the heat from the laser and stabilize the temperature.

Why do Scientists & Engineers Choose Laser Lab Source?

  • Get DIRECT, Fast Tech-Support from the Product Engineer, No Sales Person in the Middle

  • Get the Lowest Price, Factory Direct, No Mark-Up's, Suppliers Post their Own Price

  • Get a 30 Day Evaluation Period with No Risk Return on Most Products, Check Availability